FinUties 101 · Risk · Beginner
Position sizing basics
How big a position is matters more than where you enter. The fixed-fraction method sets the amount at risk first, then works backwards from the stop distance to the number of units.
In this lesson
- Calculate a position size from an account size, a risk fraction and a stop distance
- Show how a fixed fraction limits the damage of a losing run
- Explain why a gap can make the actual loss larger than the planned one
Read first: Drawdowns and the maths of recovery
Most beginners spend their time on what to buy and when. The size of the position often matters more. Size decides how much one wrong idea costs, and so whether a run of wrong ideas, which every method has, can be survived.
Start from the loss, not the gain
The fixed-fraction method begins with one decision: the share of the account you accept to lose if the idea fails. This is the risk per trade, commonly a small figure such as 1% or less. Everything else follows from it.
The steps:
- Amount at risk = account size x risk fraction.
- Stop distance = entry price - stop price (for a purchase).
- Position size = amount at risk / stop distance.
A worked example
The account is 10,000. Risk per trade is 1%, so the amount at risk is 100. A share is bought at 50, and the stop, the price at which the position is closed to limit the loss, is placed at 48. The stop distance is 2.
Position size = 100 / 2 = 50 shares. The position is worth 2,500, a quarter of the account. If the stop is hit, the loss is about 100, which is 1% of the account.
Now widen the stop to 45, a distance of 5. The size becomes 100 / 5 = 20 shares. The wider the stop, the smaller the position, because each unit can lose more before the exit. The stop belongs where the idea is shown to be wrong, not where it makes the position look large.
Why a small fraction matters
Losses come in runs, whatever the method. Compare ten losses in a row:
- At 1% of the current account each time, the account ends at 0.99 to the power of 10, about 90.4%. The loss is about 9.6%.
- At 10% each time, the account ends at 0.90 to the power of 10, about 34.9%. The loss is about 65%.
From the previous lesson, a 65% loss needs a gain of about 187% to recover. A 9.6% loss needs about 10.6%. The first is close to risk of ruin; the second is an unpleasant month. Using a fixed fraction of the current account also shrinks the next position after a loss, which slows the damage.
What a stop cannot do
A stop-loss is an order that closes the position at a chosen price. It controls the plan, not the market. When the price gaps, jumping from one level to another without trading in between, as at an overnight or weekend open, the stop fills at the next available price. In the example, a gap from 49 to 40 turns a planned loss of 100 into 50 shares x 10 = 500, five times the plan. The 1987 crash and the March 2020 fall both saw stops filled far from their levels (see the case files).
That is why overall exposure matters as much as the stop. The size of each position, the number of positions open together and the leverage used all set the loss when stops fail.
Common mistakes
- Choosing the size by confidence or by the amount you want to make.
- Moving the stop further away after entry to avoid being stopped out, which raises the loss the size was built for.
- Treating the risk fraction as per position when several positions move together. Five positions at 1% in assets that fall together are one 5% bet.
- Ignoring costs such as the spread and slippage, which add to the loss when the stop is hit.
- Increasing size after a winning run, which makes the next loss larger.
In practice
Write the three numbers down before any entry: amount at risk, stop distance, size. If the size comes out too small to be worth taking, the idea does not suit the account, and the answer is to pass on it, not to enlarge the risk. Demo accounts on FinUties Trading are a place to practise the routine with no real money.
Check yourself
The account is 20,000, risk per trade is 1%, entry is 40 and the stop is 38. How many shares?
The amount at risk is 200. The stop distance is 2 per share. 200 / 2 = 100 shares. The position is worth 4,000, a fifth of the account.
Why do traders set the amount at risk before choosing the size?
Because the size is then a result of how much you accept to lose and how far the stop is, not of how confident you feel. A wider stop gives a smaller position.
A stop sits at 38 but the price opens at 35 the next morning. What happens to the planned loss?
The loss is larger than planned. A stop is not a guarantee of the exit price; when the price gaps past it, the order fills at the next available price.